Friday, November 7, 2014

Weathering - Drybrushing


Good day fellow otakus! Today I'll be sharing about Drybrushing - a simple yet highly effective detailing and weathering technique that can bring out the dormant details on your model.
Here's what you'll need:

1. paint and appropriate thinner
2. old but clean flat tip paintbrush
3. paint mixing dish
4. paper towels



Click on the Read More link for the rest of this post...

Monday, November 3, 2014

Back to Basics 2: Getting Rid of Nubs

Nubs - those unsightly bits of protruding plastic on a part that has been liberated from it's sprue - are an inevitability. The best a manufacturer can do is to undergate (to design a sprue in such a way that the gates will have minimum effect on a kit's appearance once assembled), but even then they still need to be cleaned off. Luckily this isn't difficult to do in most cases. Here's what you'll need:

1. Hobby Knife
2. Waterproof sandpaper in increasing grits (ex. 600 grit, 800 grit, 1000 grit, 1200 grit...)
3. Wash basin with water
4. Old soft-bristle toothbrush
5. Nail buffer (optional)
6. Paper towels


Click on the Read More link for the rest of this post...

Wednesday, October 29, 2014

Experimenting with Nail Polish

Greetings fellow otakus! Despite my busy building schedule, I'm always on the lookout for budget friendly plamo ideas. I recently stumbled upon this concept of using nail polish as paint. A quick googling revealed that the car modeling community has been doing it for a while, and they've been getting really nice results. Some gunpla builders like Ghost of Zeon have also been putting it to good use. This got me super excited, because nail polish is a lot cheaper than hobby grade paints. Instead of asking a billion questions, I decided I'd give it a try myself.


For the experiment, I bought 1 bottle of nail polish (<$1), a bottle of acetone (<$1) and a small bottle of Mr. Color lacquer thinner ($2.50).  I got the lacquer thinner because according to many guides, nail polish is actually a lacquer. I prepared a couple of extra parts, one of which was primed with Mr. Surfacer 1200, and a few plastic spoons.


Click on the Read More link for the rest of this post...

Monday, October 27, 2014

Commission Finished - MG Kampfer

Good day plamo otakus! I was able to get some work done on my commission projects over the weekend - surface prep on an SD Zeong, a bit of snap building on an MG Zaku Cannon, and best of all, I completed the MG Kampfer!



Click on the Read More link for the rest of this post...(PIC HEAVY)

Wednesday, October 22, 2014

Back to Basics 1: Cutting Parts from the Sprue

Hello fellow otakus! As promised, I'm doing a "Back to Basics" series, which will feature some rudimentary plamo techniques along with some tips and tricks I picked up along the way. I know there are a ton of these tutorials online, and my methods might not even be the optimal approach, so if you have any suggestions feel free to contribute in the comments section below.

Let's start off with the most basic of the basic - how to properly remove a part from the sprue.

You'll need:
1. A kit
2. Side cutters



Click on the Read More link for the rest of this post...

Monday, October 20, 2014

Adding Detail - Dry Transfer Decals

Hello fellow otakus! Here's a quick guide on how to use those dry transfer decals that come with many MG kits.

You'll need the following:
1. hobby knife
2. cutting mat
3. masking tape
4. round-tipped object (like a ball point pen's cap)

Click on the Read More link for the rest of this post...

Monday, October 13, 2014

Basics or Bust: Reflections on Custom Building

Not too long ago I joined my first live event, and had my ass handed to me. It felt bad, of course, for someone to tell you your work isn't going to cut it because it lacked the basics. It sank in after a while, and then I felt ashamed. Not of my entry, but of myself - that I had the audacity to submit something I knew wasn't optimal. I went there expecting to fail, and so I did, miserably. I knew I was going to fail, because I was aware of the flaws on my entry. Why didn't I fix them? Why did I not do it properly? Why did I think the errors I could notice myself might be overlooked by the judges? I took some time to reflect on my actions, and I decided it would be good to share my findings with the community.






Click on the Read More link for the rest of this post...


Commission WIP - MG Kampfer

Good day plamo fanatics! It's going to be a hectic week once again, thanks to a ton of commission projects I've got lined up. Next on my itinerary is an MG Kampfer. Here's where I am at the moment...



Click on the Read More link for the rest of this post...

Thursday, October 9, 2014

G No Reconguista and Gundam Build Fighters Try - First Impressions

It's been an eventful week in the world of Gundam - with the conclusion of the Philippine leg of the GBWC, both new anime series: G no Reconguista and Gundam Build Fighters Try came out. If you haven't seen them yet, you can watch them here:

G no Reconguista
GBF Try



Here's my two centavos on the first few episodes...

Click on the Read More link for the rest of this post (SPOILER ALERT!)

Wednesday, October 8, 2014

Adding Detail - Masking

Hello plamo nerds! Here's a simple guide on how to do some basic masking that will help bring out the details on your model.

Here's what you'll need:
1. Masking Tape (Tamiya or Style-X, or any hobby-grade masking tape)
2. Hobby knife
3. Cutting mat
4. Tweezers


Click on the Read More link for the rest of this post...


Tuesday, October 7, 2014

GBWC 2014 - Philippines

Hello Plamo fans! Just got back from an extended weekend, the highlight of which was the Gunpla Builders World Cup held at Robinsons Magnolia! Unfortunately I was not able to go myself, but my bro-in-law was able to drop by the event and snap some pics.



Click on the Read More link for the rest of this post...(PIC HEAVY)

Thursday, October 2, 2014

Commission Finished - MG GM Sniper

Hello fellow otakus! Here is the finished MG GM Sniper. I'm going to be sad to see him go, but I hope the owner appreciates it as much as I enjoyed building it!


Click on the Read More link for the rest of the pics...